Description

Built for highly corrosive water or liquid containment in a normal environment with NSF/ANSI 61 Certified liner (Sunnik SK-02 HDG + HDPE).

*Hot Dipped Galvanised
**High Density Polyethylene Geomembrance Lining

Manufacturing Specifications

General Applications : HDPE (High Density Polyethylene) Geomembrane lined HDG (Hot Dipped Galvanized) Mild Steel Sectional Tank Panel is a high corrosive water, food processing plant or liquid containment in normal environment

Standards : ‘Sunnik’ HDPE Lined HDG Sectional Panels Tank (rectangular) constructed with hydraulically pressed flanged panel conform to British Standard 1564:1949 & 1975 and latter HDPE lined heated onto internal side of panels.

Materials : The mild steel used in the manufacturer of the plates, stays, cleats, and pads for installation confirm to the requirements of B.S.4360 grade 43A.

Tank Panels : Tank panels of 4′ x 4′ or 1m x 1m square are hot dip galvanized to ISO 1461:1999

Panel : HDPE Lined HDG Sectional Panels Tank covers are hydraulically pressed 1.5mm thk. x 1m x 1m square.

Stays and Cleats : The stays and cleats shall be of stainless steel*

Bolts and Nuts : Bolts nuts and washer that are in contacted with water shall be stainless steel* whereas those not in contacted with water shall be of hot dipped galvanized type.

HDPE Lining : 1.0mm thick HDPE (High density polyethylene) geomembrane heat lined onto panel’s internal surface. All seams shall be homogeneous welded using hot fusion welding.

Ladders : The internal ladder shall be stainless steel* or Aluminium type while the external ladder shall be either galvanized or aluminium type.

Level Indicator : Galvanized indirect reading indicator (ruler type) shall be provided on request.

B.S. 1564: 1975 (Revised) : For cold liquid with density of 1.0 and having temperature not exceeding 38°C.
Tanks 4ft Height: Bottom, sides and ends. 5mm
Tanks 8ft Height: Bottom, sides and ends. 5mm
Tanks 12ft Height: Bottom, sides and ends. 5mm
Tanks 16ft Height: Bottom and first tiers of sides and ends. 6mm
Second, third and top tiers of sides & ends 5mm

Notes:

• Compliance with American Society for Testing and Materials (ASTM)*
• Manufacturing specifications are subject to change without prior notice.
• Manufacturing specifications can be customized but subject to manufacturer’s approval and safety standards.
• It is recommended all HDPE Lined HDG
• Sectional Panels Tank shall be installed by our approved installers only

Read More :

https://www.sunnik.net/products/hot-dipped-galvanized-high-density-polyethylene/​