Description

HOT DIPPED GALVANIZED SECTIONAL WATER TANKS (ISO 1461:2009)

Water storage for air-condition make-up, fire fighting and production purposes.

*Hot Dipped Galvanised

Manufacturing Specifications

General Applications : Water storage for air-conditioner make-up, fire fighting and for food production (with Food Grade Epoxy Coating)

Standards : SUNNIK pressed steel sectional water tanks (rectangular) constructed with hydraulically pressed flanged panels conform to B.S. 1564 and hot dip galvanized to ISO 1461:2009

Materials : Mild steel used in the plates, stays, cleats, and pads all conform to the requirements of BSEN10025:2004

Tank Panels : Tank panels of 4ft x 4ft or 1m x 1m square are hot dip galvanized to ISO 1461:1999

Tank Covers : Standard tank covers are hydraulically pressed 3.0mm / 1.5mm thk x 4ft x 4ft or 1m x 1m square and are hot dip galvanized

Stays and Cleats : The sides and ends of all tanks shall be supported by stays at the junction of two or more plates. The stays and cleats shall be made from mild steel and hot dip galvanized.

Bolts and Nuts : Bolts, studs, nuts and washer conform to B.S. 4190 and are hot dip galvanized type.

Joining Compounds : Non-toxic, odorless PVC Foam Sealant and butyl sealant or equivalent shall be supplied.

Manhole and Vent : Each tank or compartment shall be supplied with one no. of 600mm square manhole and one 100mm diameter vent with insect proof attached on to tank cover.

Ladders : Hot dip galvanized ladder for tank internal and external are provided (aluminium ladder on request)

Level Indicator : Mild steel or galvanized indirect reading level indicator is provided on request.

B.S. 1564: 1975 (Revised) : For cold liquid with density of 1.0 and having temperature not exceeding 38°C.
Tanks 4ft Height: Bottom, sides and ends. 5mm
Tanks 8ft Height: Bottom, sides and ends. 5mm
Tanks 12ft Height: Bottom, sides and ends. 5mm
Tanks 16ft Height: Bottom and first tiers of sides and ends. 6mm
Second, third and top tiers of sides & ends 5mm

Notes :

• Manufacturing specifications are subject to change without prior notice.​
• Manufacturing specifications can be customized but subject to manufacturer’s approval and safety standards.
• It is recommended all SUNNIK HDG Sectional Panels Tank shall be installed by our approved installers only.
• Service temperature of water shall be at ambient temperature.
• For safety reason, please seek manufacturer’s advice on other liquid containment, pH level or higher liquid temperature.

Read More :

https://www.sunnik.net/products/hot-dipped-galvanized-sectional-water-tanks-iso-14612009/